AQUILINE-AERO.COM
Эксплуатация, продажа и аренда воздушных судов. Самолеты Ан-24, Ан-26, Ан-26Б-100. Приобретение и продажа запасных частей к самолетом Российского производства.
ТРАСТ АэроСуперМаркет - электронная доска бесплатных объявлений авиационной тематики, место, где каждый желающий может вывесить свое объявление, а все посетители этой доски - прочитать его.
Контакты
Головной Офис Объединенные Арабские Эмираты Международный Аэропорт Шарджа
тел.: +971 6 5570710
факс: +971 6 5570495
По вопросам продаж: sales@trast-aero.com
The ELT automatically activates during a crash and transmits the standard swept tone on 121.5 and 243.0 MHz. Every 50 seconds for 520 milliseconds (long message protocol) the 406.025 MHz transmitter turns on and transmits an encoded digital message to the Cospas/Sarsat satellite system. The ELT can be programmed with the aircraft's 24-bit address as well as latitude/longitude information from the aircraft navigation system when used with the Artex ELT/NAV Interface (P/N 453-6500). Also available is the Artex C406-2HM, which is equipped with a 6 axis "G" Switch for helicopter installations. The mounting hardware for the C406-2 Series is compatible with all previous versions of Artex 406 MHz ELT's.
Output Power: 406 MHz 5 W + 2 dB (520 ms / 50 sec) for 24 hours @ -20° C, 121.5/243.0 MHz 100 mW min (+20 dBm for 50 hours @ -20° C)
Output connector: BNC Female
Activation: Automatic by 4.5 ft/sec G-Switch or Manual
Battery: 5 year Lithium (LiMnO2, solid cathode)
Temperature Operating: -20° C to +55° C, Storage -55° C to +85° C
Self Test: G-Switch enabled, 406 MHz Power, Antenna/Coax Connection, Position Data Present, Low Battery
Remote Control: Rod (110-320) (<350 KTS), Blade (110-337) (Mach 1)
Mounting Hardware: Mounting Tray, Protective Top Cover, End Cap
Other Parts: Coax cables, Buzzer (to alert ground crews of accidental activation)
Weights: ELT Transmitter 3 LB 5.8 oz Max (1.53 Kg), Mounting Tray 7 oz (200 g), Protective Top Cover 6.7 oz (190 g), End Cap 3.8 oz (108 g), Total Weight 2.02 Kg
Measurements: ELT Transmitter with Mounting Hardware Installed 11.74" (298mm) L x 3.90" (99mm) H x 3.82"( 97mm)W
