[an error occurred while processing this directive] [an error occurred while processing this directive]



Aviation Lubricants and Greases

Aviation Tires

Aircraft Parts

Helicopter Parts

Avionics

Batteries

Survival Equipment

Jeppesen product and services

Garmin product

Garmin product
Switch to Russian Version











Head Office
United Arab Emirates
Sharjah International Airport

tel.: +971 6 5570710
fax: +971 6 5570495
Sales:
sales@trast-aero.com


Peru, Lima

tel/fax: +51 1 5618847
tel.: +51 1 98828210
sales@trast-aero.com


Colombia, Bogota

tel.: +571 415-8215
       +571 413-3951
sales@trast-aero.com


Venezuela, Caracas

tel.: + 58 414 9994240
sales@trast-aero.com


Jordan, Amman

tel.: +962 79 9413334
sales@trast-aero.com


Republic of Congo, Brazzaville

tel/fax: +242 5339575
sales@trast-aero.com


Djibouti, Djibouti

tel.: +971 5 03002094
sales@trast-aero.com


Russia, Rostov-On-Don

tel.: +7 918 5002499
sales@trast-aero.com


Ukraine, Kharkov

tel.: + 38 067 5461919
       + 38 050 6184294
sales@trast-aero.com


Ukraine, Kiev

tel.: + 38 067 2090923
sales@trast-aero.com


Kazakhstan

kazakhstan@trast-aero.com


Kyrgyz Republic, Bishkek

sales@trast-aero.com


Moldova

sales@trast-aero.com


Sao Tome
tel.: +239 241450
fax: +239 225218
sales@trast-aero.com



AVIA-BOARD.COM - �������-������. ���������. ����� ��������������.





G-354

Def Stan 91-53
XG-287
MIL-PRF-23827
AIR 4210

NYCO GREASE GN 10

AIRCRAFT SYNTHETIC GREASE

NYCO GREASE GN 10 is a synthetic ester-based grease with extreme pres­sure properties and with an operating temperature range of-73oC to + 121oC. It is intended for use in bail, roller and needle bearings, gears and on sliding surfaces of low-power equipment. It is also intended for use on other equipment requiring a lubricant with high load carrying capacity.


Main characteristics

Properties Units Typical values Test methods
Appearance homogeneous paste
Dropping point oC 174 ASTM D 2265
Penetration 1/10 mm   ASTM D 217
• unworked   298  
• after 60 strokes   294  
Oil separation     FTM-S-791
30h at 100oC % weight 2.8 method 321
Load-wear index daN 41 ASTM D 2596
Gear wear     FTM-S-791
after 3000 cycles     method 335
under 4.5 daN mg/1000 cycles 0.65  

All the NYCO Products

See also:

© Copyright 2002-2008. TRade Aero Space Technologies LTD. All Rights Reserved